SXT 5HnD is a low cost, high speed 5GHz wireless device. Dual polarization 802.11n and Nv2 TDMA technology help to achieve even 200Mbit real throughput speed. Complete with a ready to mount enclosure and built-in antenna, this is the perfect CPE.

FEATURES

• FCC certified
• Solid all-in-one design: quick and easy to mount
• Tower friendly one hand enclosure access
• 5GHz 802.11a/n wireless onboard
• One 10/100 Ethernet port
• 16dBi (+/- 2) dual chain antenna built-in
• Signal strength LED indicators on back
• USB 2.0 port, voltage and temperature monitors
• Extended L2MTU support to avoid fragmentation overhead in MPLS, QinQ etc

SPECIFICATIONS

• CPU speed: 400MHz
• TX power: 26dBm max
• Antenna gain: 16dBi (+/- 2)
• RAM:32MB
• LAN ports:1
• Integrated Wireless:Yes
• Wireless standards: 802.11 a/n
• USB: 1
• Operating System: RouterOS
• RouterOS License: Level3

OmniTIK U-5HnD The perfect outdoor AP OmniTiK is a weatherproof outdoor AP with dual-polarized omni antennas- the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard device. Weatherproof, durable and ready to use. It has five 10/100 Ethernet ports, PoE support and a built-in 400mW 802.a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput. LED signal indicators on it's back are fully customisable, show Ethernet activity or wireless signal- or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive. The OmniTIK runs RouterOS with all it's features

SPECIFICATIONS

• CPU: Atheros AR7241 400MHz network processor
• Memory: 32MB DDR SDRAM onboard memory
• Boot loader: RouterBOOT
• Data storage: 64MB onboard NAND memory chip
• Ethernet: Five 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X, L2MTU frame size up to 2030
• Wireless: WirelessBuilt-in 5GHz 802.11a/n 2x2 MIMO
• Antenna: Two 7.5dBi (+/-1dBi) omni with different polarities (ch0 horizontal, ch1 vertical polarization)
• Extras: Reset switch, Beeper, USB 2.0 port, Voltage monitor, Temperature monitor
• LEDs: 5 programmable LEDs (ethernetactivity by default), one power LEd
• Power options: Passive 9-30V PoE only. 16KV ESD protection on RF port
• Operating system: MikroTik RouterOS v5, Level4 license
• Package contains: OmniTIK unit, mounting bracket, hose clamp, PoE injector, 24V power adapter

MikroTik's RouterBOARD 18 MiniPCI to PCI adapter is an advanced eight-slot adapter for 3.3v MiniPCI to PCI standard sockets. The adapter is provided in PCI card form with four integrated MiniPCI slots that allow you to use four MiniPCI cards in one standard PCI socket. The MiniPCI adapter includes two LEDs connected to each MiniPCI (according to standards).

Specifications

• Standards: MiniPCI v1.0 standard compliant; PCI v2.1 and v2.2compliant
• Operation Voltage: PCI 3.3v and 5v support; optional - 3.3v only support(factory option - RouterBOARD 14-3.3)
• Input Power: Up to 2.5W of 3.3v power supplied to each Mini PCI card
• LED: Two LEDs connected to each MiniPCI (according tostandards)
• Operation Temp.: 0o C to 70o C (32oF to 158oF)
• Storage Temp.: -20o C to 80oC (-4oF to 176oF)
• Humidity Range: 0% to 90%
• Mounting: Mounting for optional tin shield
• Connector: Traces for antenna out connector (contact sales for thisfactory option)

• CPU: PowerPC PPC460GT
• Memory: SODIMM DDR Slot, 512MB RAM
• Boot loader: RouterBOOT, 1Mbit Flash chip
• Ethernet: Ten 10/100/1000 Mbit/s Gigabit Ethernet with Auto-MDI/X
• MiniPCI: none
• Storage: 64MB NAND
• Serial port: One DB9 RS232C asynchronous serial port
• Extras: Reset switch, Beeper
• Power options: IEC C14 standard connector 110/220V
• Fan: default none, header for optional fan available
• Dimensions: 1U case: 44 x 176 x 442 mm, 1200g. Board only: 365g
• Operating System: MikroTik RouterOS, Level 6 license

SPECIFICATIONS

• 5V power injector for USB (RB/411UAHR)